Australian Owned & Operated Customer Portal Call 1300 123 082 GET A FREE QUOTE
Home / Gases / Welding Gases / APAC 52
⚡

APAC 52 Welding Gas

A tri-mix shielding gas combining CO₂ arc stability with O₂ wetting action in argon. Produces exceptionally clean, smooth weld beads with very low spatter on mild and low-alloy steels.

Gas MixtureCO₂ 5% / O₂ 2% / Ar 93%
ProcessMIG — spray & pulsed
UN NumberUN1956
ConnectionAS 2473 Type 10
Get a Quote → ← All Welding Gases
STEEL
APAC 52
CO₂ 5% / O₂ 2% / Ar 93%

About APAC 52

APAC 52 is an argon-based tri-mix shielding gas that combines 5% carbon dioxide and 2% oxygen in a 93% argon base. The small oxidising additions stabilise the arc and lower the weld-pool surface tension, letting the bead wet out flat with very little spatter, while the low CO₂ content keeps oxidation and fume to a minimum. It is a premium choice for spray and pulsed-spray MIG on mild and low-alloy steels where bead appearance and clean-up matter — precision fabrication, automotive panels and thin-to-medium gauge sheet.

APAC 52 is supplied in E-size and G-size cylinders, charged to 19,000 kPa with an AS 2473 Type 10 outlet, and delivered across Melbourne. Compare the full welding range →

⚠ Main Hazards

  • Simple asphyxiant — the argon, CO₂ and oxygen in this mixture are heavier than air and can pool in pits, trenches and low or confined spaces, displacing breathable oxygen with no warning.
  • No warning properties — colourless, odourless and tasteless. The gas cannot be detected by human senses at dangerous concentrations.
  • High-pressure stored energy — cylinders are charged to 19,000 kPa. Secure cylinders upright, fit the valve cap for transport and inspect the valve before use.
  • Rapid release of gas can cause cold burns to skin or eyes on contact with escaping gas, valves or regulators.

🏭 Common Applications

⚡MIG welding of mild steel
⚡Low-alloy steel fabrication
⚡Galvanised steel welding
📐Precision sheet metal
🚛Automotive fabrication

Full Specifications

Gas MixtureCO₂ 5% / O₂ 2% / Ar 93%
Welding ProcessMIG — spray & pulsed
Cylinder Pressure19,000 kPa
Outlet ConnectionAS 2473 Type 10
UN NumberUN1956
Dangerous Goods Class2.2 (non-flammable, non-toxic gas)
Available SizesE-size, G-size

Available Cylinder Sizes

APAC 52 is supplied in E-size and G-size cylinders. All cylinders comply with Australian Standards; dimensions are approximate.

Most popular

E-size

4.1 m³

Water capacity: 23 L
Pressure: 19,000 kPa
Height: 880 mm
Diameter: 204 mm
Weight: 40 kg

Get Quote →
Large / high-volume

G-size

9.3 m³

Water capacity: 50 L
Pressure: 19,000 kPa
Height: 1,510 mm
Diameter: 230 mm
Weight: 60 kg

Get Quote →

Storage

  • Store in a well-ventilated area
  • Keep away from heat and ignition sources
  • Store below 45°C
  • Secure cylinders upright
  • Label per Dangerous Goods Code

Handling

  • Use appropriate valve protection
  • Check for leaks before use
  • Use compatible regulators only
  • Never use oil or grease on fittings
  • Wear appropriate PPE

Emergency

  • Ventilate the area immediately
  • Stop the leak if safe to do so
  • Evacuate low or confined spaces
  • Check valve and fittings
  • Contact emergency services (000)

Safety Data Sheet (SDS) — APAC 52

Complete hazard identification, first-aid measures, firefighting and transport information for this shielding gas mixture.

Request SDS

Safety data sheets for welding mixtures are available on request and are being added to the site.

Other Steel Welding Gases

APAC 07 O₂ 7% / Ar 93% APAC 10 CO₂ 10% / Ar 90% APAC 18 CO₂ 18% / Ar 82% APAC 25 CO₂ 25% / Ar 75%

Need APAC 52 for your workshop?

Get trade pricing on E-size and G-size cylinders, delivered across Melbourne. Call 1300 123 082 or request a quote online.

Get a Quote → Call Us
Scroll to Top